BPLVR - BLACK TONER FOR DC-5685
- MSDS: BPLVR
- Manufacturer: MITA COPYSTAR AMERICA INC
- Product Name: BLACK TONER FOR DC-5685
- National Stock Number: 6850-00N033165
Product Identification
Product ID:BLACK TONER FOR DC-5685
MSDS Date:07/01/1991
FSC:6850
NIIN:00N033165
MSDS Number: BPLVR
Responsible Party
HASBROUCK HEIGHTS, NJ 07604
US
Emergency Phone: 201-288-6900
Info Phone: 201-288-6900
Cage: 0AH08
Contractor
Telephone: 201-288-6900
Cage: 65678
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 10%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
ORGANIC PIGMENTS INCLUDING INGREDIENTS 3-5
RTECS: 9999999ZZ
Fraction By Weight: 5%
OSHA PEL 1 MG/M3 (MFR)
ACGIH TLV: 0.5 MG/M3 (MFR)
DYE
CAS: 109125-51-1
DYE
CAS: 109125-50-0
DYE
CAS: 84179-66-8
NON-HAZARDOUS POLYMER RESINS INCLUDING INGREDIENTS 7-10
RTECS: 9999999ZZ
Fraction By Weight: 85%
STYRENE-ACRYLATE COPOLYMER
CAS: 27136-15-8
PROPENE POLYMERS
CAS: 9003-07-4
RTECS: UD1842000
POLYMERIC RESIN
CAS: 68611-44-9
2-PROPENOIC ACID, 2-METHYL, POLYMER W/METHYL
CAS: 25086-15-1
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL RESPIRATORY TRACT IRRITATION
MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH WITH SOAP & WATER. EYE:FLUSH THOROUGHLY WITH WATER
FOR AT LEAST 15 MINUTES AND GET MD. INGEST:DILUTE STOMACH WITH
SEVERAL GLASSES OF WATER AND GET MD. INHAL:MOVE TO FRESH AIR.
SUPPORT BREATH ING (GIVE O*2/ARTF RESP) .
Fire Fighting
Flash Point:>350F,>177C
Extinguishing Media:CARBON DIOXIDE EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE UNDER NORMAL STORAGE AND USE
CONDITIONS.
Accidental Release
Spill Release Procedures:CLEAN UP WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CLOSE CAP TIGHTLY AND STORE IN A COOL,
DRY PLACE.
Other Precautions:AVOID COMBUSTION. AVOID INHALATION, INGESTION, SKIN
OR EYE CONTACT.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:268F,131C
Spec Gravity:1.1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE BLACK POWDER, PRACTICALLY ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE IN NORMAL HANDLING AND USE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.